Kelly Generator & Equipment, Inc.

1955 Dale Lane, Owings, Maryland 20736

410-257-5225, FAX 410-257-5227, Toll Free 800-677-3815

Residential and Light Commercial Generators

Generac manufactures a complete line of residential / light commercial standby generators that can be installed during new construction or retrofitted into existing homes and businesses.  These systems range from 7 to 40 kilowatts of output, in both air- and liquid-cooled models.  All models are factory-built for natural gas operation and can be easily reconfigured for liquid propane (LP gas) operation.

Residential / light commercial power systems are permanently installed outside, similar to an air-conditioning unit. They work with a matched UL Listed automatic transfer switch that responds within seconds when utility power is lost down, supplying electrical power to all pre-selected lights, appliances and equipment. Automatically!

Our air-cooled systems are available in 7, 12 and 15 kilowatt models.  The liquid-cooled residential standby power generators are available in 15, 20, 25, 30 and 40 kW models.

These systems include:

Standard Weather Protective Enclosure – Protects the generator from harmful weather and reduces exterior noise levels. Keyed locks provide security.

Choice of Fully Automatic Transfer Switches –

1.      UL Listed, remote-mounted 100 or 200 amp automatic switch options (depending on model)

2.      UL Listed, remote-mounted automatic transfer switch with 8 or 12 circuit emergency load center (air-cooled models only)

Built-in Battery Charger - Maintains battery at optimum performance level.

Automatic Safety Shutdown - Protects the engine and generator in the event of low oil pressure, high temperature, overspeed and / or overcrank.

Automatic Seven-day Exerciser - Runs the system weekly to maintain top running condition.

Natural Gas or Liquid Propane Operation – Factory-built for natural gas operation. Can be easily reconfigured for LP gas operation.

Flexible Fuel Line – For connection from rigid pipe to the generator fuel inlet.

Durable, High Strength Composite Mounting Pad (air-cooled models only) – Eliminates the need to pour a concrete mounting pad to support the generator.

UL2200 Listed

EPA / CARB (California Air Resource Board) Certified, where applicable

100% Factory Performance Tested

[ Home ] [ Up ]

Send mail to contactus@kge.com with questions or comments about this web site.